libreboot

Unnamed repository; edit this file 'description' to name the repository.
Log | Files | Refs | README

commit 01f6d6f272851015fd3a18ecf798e3a6d7ab43ed
parent b9e8c1020a47a183fd9a533f7230197fbb86f472
Author: Leah Rowe <info@minifree.org>
Date:   Sat,  3 Sep 2016 18:10:57 +0100

docs/{install,bbb_ehci}/bbb*i: mention BBB ScrewDriver distribution

Diffstat:
docs/install/bbb_setup.html | 10++++++++++
docs/misc/bbb_ehci.html | 9+++++++++
2 files changed, 19 insertions(+), 0 deletions(-)

diff --git a/docs/install/bbb_setup.html b/docs/install/bbb_setup.html @@ -22,6 +22,16 @@ may also work. </p> + <p> + <strong> + NOTE: this documentation may be outdated, and discusses + configuring SPI flashing on the default Debian system that the BBB + sometimes comes with. If you want an easier time, just use + <a href="https://www.coreboot.org/BBB_screwdriver">BBB ScrewDriver</a> + which comes pre-configured. + </strong> + </p> + <p> There was no justification for a further section for the Teensy. Simply refer to <a href="https://www.flashrom.org/Teensy_3.1_SPI_%2B_LPC/FWH_Flasher#ISP_Usage">this page on flashrom.org</a> for information about how to set it up, and correlate that with the pins on the SPI flash chip as per other guides in the libreboot documentation for each board. At the time of writing, the teensy is tested for flashing on the ThinkPad X200, but it should work for other targets. here is a photo of the setup for the teensy: <a href="http://h5ai.swiftgeek.net/IMG_20160601_120855.jpg">http://h5ai.swiftgeek.net/IMG_20160601_120855.jpg</a></p> <p> diff --git a/docs/misc/bbb_ehci.html b/docs/misc/bbb_ehci.html @@ -41,6 +41,15 @@ EHCI Debug on the target's kernel (optional, recommended)</a></li> <li><a href="#References">References</a></li> </ol> + <p> + <strong> + NOTE: this documentation may be outdated, and discusses + configuring EHCI debug on the default Debian system that the BBB + sometimes comes with. If you want an easier time, just use + <a href="https://www.coreboot.org/BBB_screwdriver">BBB ScrewDriver</a> + which comes pre-configured. + </strong> + </p> <p>If your computer does not boot after installing libreboot, it is very useful to get debug logs from it, from the payload (grub) and/or the kernel (if gets to there). All of them stream debug logs on the